 |
|
List Price - $579
The Magbar J series is the first and only dual-reader, allowing the reading of barcodes and magnetic stripes in the same slot. These are decoded readers with internal decoding and therefore need no external devices for decoding. They can be used anywhere where the reading of both barcodes and magnetic stripes are required, such as in security systems, time and attendance systems, college campuses, taxi, and retail installations. These readers are available in many different industry standard interfaces, are programmable, and are available with a variety of options, such as leds, alphanumeric displays, relays, and door sense inputs.
| Scanning Speed | 3-30 ips (7-76 cm/sec) | |
| Magnetic Stripe | Track2, Tracks 1&2, or Tracks 2&3, each character set is supported on each track | |
| Scan Direction | bi-directional | |
| Symbologies | Code 39,2/5/I2/5,C128,UPCA,EAN13,Codabar | |
| Resolution | 7 mil (low), 13mil(high) | |
| Read Height | 0.4"(1cm) standard, 0.46" optional, other heights available on request | |
| Good Read Beep | Programmable | |
| Slot Width | 0.050"(1.2mm) | |
| Indicators | 2 Leds (programmable) | |
| Light Source | 630nm(visible), 940nm(infrared) | |
| Temperature | -40c - +85c | |
| Dimensions | 4.6"L x 2.4"W x 1.4"H, 11.6cm x 6cm x 3.5cm | |
| Weight | 6 ounces | |
| Material | Black Polycarbonate | |
| Power | 5VDC(150ma), 8-15VDC, or 15-30VDC | |
| Standard Wiring | 3' (91cm) cable w/flying leads or connectors depending on interface | |
| Sense Inputs | TTL level (minimal current draw) | |
| Relay | 30VDC 500ma or 5V TTL level (minimal current draw) outputs | |
| Displays | Alphanumeric character display (8-character) |
Swipe Readers Communication Software &
Instructions
Access Control (ACON) Demo Software for Windows
Reference
for Door Strike Vendors
Time & Attendance (TAMS) Demo Software for Windows
RenCode Card Encoding
Software for Windows
