issue.jpg (3347 bytes)  
Motorized Desktop Encoder
IntelliStripe 380


List Price: $1430

Small Footprint Size:
Weighs less than 2 lb.
and less than 8 inches in length


Magnetic Stripe Read /
Write Software




  • Read and write magnetic stripe cards per ISO 7810, 7811
  • Read and write smart cards per ISO 7816 and EMV Level 1
  • Motorized for increased encoding precision and reliability
  • RS-232 primary host interface using MCP Protocol
  • Flash programmable
  • Supports HICO & LOCO cards
  • Dual color LED status indicator
  • Remote power pack
  • Small footprint
  • Low cost

 

Quick Notes:

  • No power supply / adapter required, 120 to 240V, 50-60 Hz
  • Eliminates all writing errors
  • Reads and encodes two types of cards:
    a) Magnetic stripe single, dual or triple tracks
    b) Smart Card
  • Reads and encodes on any card with 5 or 7 data bit format. This feature is available on all magstripe tracks, in any bit density, in the range of 75 or 210 bpi.
  • Supports "Jam Clearance"
  • Its small footprint size is ideal for limited counter-top and desktop space in financial institutions
  • Enable/Disable tracks 1, 2 or 3
  • Hardware can be set to HiCo or LoCo or it can be set to "Automatic Selection Mode" so the hardware automatically detects the coercivity of the card.
 
Specifications
Magnetics Tracks 1, 2 & 3, HICO/LOCO read/write per ISO 7810, 7811
Smart Card T=0, T=1 smart card per ISO 7816 and EMV level 1
Memory Cards SLE 4442/SLE 4432 families, SLE 4428/SLE 4418 families, SLE 4404 family, I2C™  generic cards
Card Speed 8 i.p.s. +\- 20% nominal
Main interface RS-232, 9600 baud - 115 Kbaud
Input voltage +12 VDC +/- 5%
Current draw Idle: 170 mA or less

Maximum: 3.0 A (during HICO encode sequence)
1A draw from an auxiliary serial port device
Comm protocol MagTek MCP protocol
Command set MagTek MCP command set
MTBF Electronics: 125,000 hours

Magnetic read head: 1,000,000 passes
(500,000 insertion cycles)

Smart card contacts: 1,000,000 transactions
Mechanical Height: 3.85 in (98 mm) includes mounting flange
Width: 4.47 in (111,75 mm)
Length: 8.44 in (211 mm) includes mounting flange
Weight 2 lbs (0.9072 kg)
Operating Environment
Temperature Operating: 41°F - 113°F (5°C - 45°C)
Storage: -40°F - 158°F (-40°C - 70°C)
Humidity Operating: 5% - 95% non-condensing
Storage: 5% - 95% non-condensing
Altitude Operating: 0 - 10,000 ft (0 - 3,048 m)
Storage: 0 - 10,000 ft (0 - 3,048 m)
Agency Approvals
UL/CRU
CE Class B
FCC Class B
  


MagTek-85 Swipe Encoder LoCo Tracks 1&2&3

MagTek Card Tester; Tests both Hi-Co and Lo-Co cards

MagTek-95 Standalone Desktop Encoder HiCo/LoCo all tracks