E-swipe is a user-friendly serial communication
software designed for the IBC Smart readers. The features / options
are accessible through the drop-down menus and toolbars. The status
bar displays the current software settings and communication messages.
Features:
NEW!
Configure the communication port and settings: RS232 , RS485 and
TCP/IP that best suit your hardware requirements.
Set the
bar code options for every symbology that the reader supports. These
options include enabling and disabling the symbology, setting the
length of the bar code read, and specifying the bar code prefix,
etc.
Set the
magstripe options for track 1, 2 and multi-track readers. These
options include enabling and disabling the track, specify the the
prefix and delimiter characters, setting the magstripe length, etc.
Set the
relay, speaker, and LED options to the desired settings.
Program
the reader by sending the appropriate commands
NEW! Enable or disable the password on the DC reader.
NEW!
Program STA/SA reader easily.
Create
the schedule and employee files to download to the reader. View
the data files uploaded from the reader using the built-in text
editor.
Download
a schedule and an employee file to the reader and view the reader's
response instantly.
Upload
the access control list (employee and schedule data) stored in the
reader and save the data to a file, if required.
Poll
single or networked readers to obtain the transactional data.
Add the
computer date and time when polling the J reader.
Save
all the data that is coming from the reader to a log file.
NEW!
Import the transactional data to the Exeba® Time and Attendance
application.
NEW!
Obtain, select and download the access control list from Exeba-TAMS.
Define
the poll and delay settings such as time-outs and poll delay.
Define
the protocol parameters for the networked readers.
NEW!
Test the communication between the reader and software
http://www.exeba.com/eswipe.htm
|